As promised, Sportablet 5.3 (available today on google play) can upload directly to Training Peaks. The Uploader for Garmin 4.1 got this feature a few days ago.
4 Comments
The Uploader for Garmin, version 4.1, supports direct upload to Training Peaks. As usual, it may take a few hours before Google Play makes that version available to you guys. Of course, Sportablet will get this feature as well, though you may have to wait till Sunday (I've got a real job too :-).
Thanks to Training Peaks for their support, and to the ubiquitous DC Rainmaker who put us in contact. ![]() Sportablet 5.2 and the Mobile Uploader for Garmin 3.9 can now export activities from their "native" TCX / FIT format to GPX. This had become a frequent request, so I hope it will make some of you guys happy :-). Please note that GPX is not a true replacement for FIT or TCX. GPX was born to capture GPS coordinates, not to model fitness activities. There is no direct / reversible mapping from a TCX to a GPX, and most of the data inside a FIT file won't fit :-) in a GPX file. The approach I've adopted in my apps is basically the same approach adopted in Garmin Connect: export only GPS and time coordinates. This is what you really need to use mapping / geocaching apps. If you want all the data, stick with the native format :-) ![]() Sportablet 5.1 and the Uploader for Garmin 3.7 provides alpha-level support for the Garmin Swim and the Forerunner 50 / 60 / 70. This is basically closing the circle for all the ANT+ Garmin devices. To set up your Android device (10" tablet: use Sportablet; 7" tablet or smartphone: use the Uploader), please follow these instructions. Remember that you have to install the two dynastream services, unless you're using an Xperia phone, in which case you can find more detailed instructions here. The Swim and the FR 50 / 60 / 70 have a twist in their communication protocol, so you need to set up my apps accordingly: After you set that option, you'll be ready to give it a try. As always, it is advisable to turn off any source of interference, as it's difficult to maintain the delicate ANT+ timing in android. The posts above provides some valuable tips, but in the end, setting your Android device in airplane mode could be the simplest thing to do. On my Xperia Ion, airplane mode seems to disable ANT+ as well, but if you use the USB dongle, or if you have another model, give it a try. IMPORTANT NOTE:
Some users have complained that my app is reading the wrong date/time for activities using these garmin models. It's not really like that. Some background: in (other) models, with GPS, Garmin uses the timestamp from the GPS signal. In these models, without a GPS, Garmin has actually two clocks. One is used to show you date and time on the watch face; the other is used internally, to associate a date and time to activities, steps, etc. The two clocks are not automatically syncronized (yeah). So even if you see the right date and time, the internal clock will be stuck to the late 80s until you pair the watch with the garmin express agent. See this post from Garmin, which I quote here: "The first time activities are uploaded from the Garmin Swim, FR60 or FR70 to Garmin Connect, they may show dates of late 1989 and early 1990. This can occur even if the time and date have been correctly set on the watch because the internal clocks of the the device are set to December 30, 1989, by default. To prevent this from happening, pair the device with the computer through Garmin Express prior to performing any activities. The internal clock will be synchronized with the computer’s clock". It's not something that I can magically fix. You have to connect the watch using garmin express once, then your date and time will be fine. |
About meI'm a decent runner, ex mountain biker, and a good swimmer. I created Sportablet to squeeze a little more fun out of my Forerunner. Archives
May 2021
Categories |